Description

Smith Ti Set of Forged Front Hubs for Sprint Car/Midget

We decided it was time to take the front-end components to the next level – hubs, spindles, and steering arms.  Details on the front hubs are below.

[360-jsv total-frames=96 main-image-url=https://www.smithti.com/wp-content/uploads/2022/11/FH-SPR-MID-LF_360_86400.jpg image-url-format=FH-SPR-MID-LF_360_xxx.jpg speed=90 inertia=12 zoom=true reverse=true start-frame-no=86400 auto-rotate=1 notification-config_drag-to-rotate_show-start-to-rotate-default-notification=true max-width=600]

Set of Forged Front Hubs for Sprint Car/Midget features:

• Each hub is hand worked and prepped
• Titanium studs and nuts– no more stripping threads because of the special press fit knurled stud to lock in
• High end Japanese tapered roller bearings – pre greased with high performance Kluber grease
• Installation benefits – there is no greasing, no adjusting the hub nut (just torque), and quick installation time (it should only take about 3 minutes vs other hubs that take much longer)
• Less drag – they’re BULLETPROOF – and they “RUN TRUE” (the truest spinning hub available)
• Precision spacers between bearings which allow you to tighten and torque the spindle nut to 50 ft lbs (eliminates drag and deflection)

These hubs are RACE-READY!  All you need to do is slide them on the spindle.  They fit EVERY wheel brand.

NO MORE:

• Greasing
• Readjusting the bearings
• Studs backing out
• Work (period!)
• Long installation – 3 minutes install time tops!

As we said, they are “RUN TRUE” hubs.  What does that mean?  It means that we take extra steps to provide consistent and accurate trueness on everything we make that turns, spins, or rotates.  These procedures are time-consuming, but at Smith Ti – we make the decision for precision – so they are 100% necessary.